Hebei vientiane floor technology co., LTD
Contact: manager zhao
Phone: 17734575158
Machine: 0311-85026518
Fax: 0311-88877586
Office: Changan district of shijiazhuang in
hebei province zhongshan east road
DongCheng square C 21st floor
A suspension assembly movement floor routine maintenance.
1. Rotate mat at the entrance at the gate of the dispel sole such as sand, can reduce the damage for suspension assembly movement floor;
2. Use neutral detergent with half dry mop clean surface pollution (such as drip glue or remove 95% alcohol);
3. Should clean the floor every day, with a slightly damp mop clean suspension assembly movement floor surface;
4. Should avoid strong light direct illuminate, prevent ultraviolet light, in order to prevent the suspension movement floor discoloration, fade.
2. Suspension assembly movement floor decontamination small tips:
1. Suspension assembly movement floor decontamination best time is before the stain was not completely dry, use cloth wipe, and then wash with water on the ground. Pollution has close relationship with stain of composition, color, but also related to the temperature. General principles are:
2. Scrape it with a spoon mixture stains away, be sure to keep in mind, not with a sharp edge tool, so as not to scratch suspension assembly movement floor surface.
3. Use cloth stains blot, first to make the following clear work, in order to avoid contamination diffusion.
4. Clean the order of the suspension assembly movement floor stains from outside to inside, with absorbing sponge rinse, do not use hot water.
3. The use of the suspension assembly floor maintenance instructions:
1. Please do not wear a nail sneakers and heels admission exercise, lest damage movement facing;
2. Do not use sharp hard hard hitting the floor, so as not to damage the floor;
3. Do not use such as sulfuric acid, hydrochloric acid liquid poured on the floor, in order to avoid corrosion floor;
4. To be clear in time after a snow, don't let the snow piling up on the floor for a long time.